The surface of the density board is smooth and flat, the material is fine, the performance is stable, the edge is firm, and the decorative property of the board surface is good. However, the moisture resistance of density board is poor. In contrast, the nail holding force of the density board is worse than that of the particle board. If the screws loosen after tightening, it is difficult to fix them at the same position.

Key Benefits

1. The density board is easy to finish. All kinds of paints and paints can be evenly coated on the density board, which is the preferred base material for paint effect.

2. Density board is also a beautiful decorative board.

3. All kinds of wood veneer, printing paper, PVC, adhesive film, melamine impregnated paper, light metal sheet and other materials can be finished on the surface of the density board.

4. After punching and drilling, hard density board can also be made into sound-absorbing board, which can be used in architectural decoration engineering.

5. Excellent physical performance, uniform material, no dehydration problem.

Furniture maintenance

1. The surface of the furniture must be wiped with a clean soft cloth. It is better to use special furniture wax for maintenance on a regular basis, and it is advisable to use it once a month.

2. The electroplated hardware of furniture should be kept dry and clean, and should be wiped frequently with a soft dry cloth to ensure its luster and non-rusting.

3. It is not suitable to hit the surface with heavy objects or cut things directly on the surface to prevent damage to the surface of the furniture, nor to push the furniture hard on the ground.

4. Try to avoid children jumping and playing on the furniture to avoid damaging the supporting structure of the furniture.

5. Pay attention to the leveling of the ground during placement.

matters needing attention

1. Always keep the density board dry and clean, do not use a large amount of water to wash, and pay attention to avoid long-term immersion of the density board. If there are oil stains and stains on the density board, it should be cleaned in time. It can be treated with household mild neutral detergent and warm water. It is better to use the special density board cleaning protection solution matched with the density board to clean. Do not use caustic water, soapy water and other corrosive liquids to contact the surface of the density plate, and do not use gasoline and other flammable substances and other high-temperature liquids to wipe the density plate.

2. It is recommended to place a pad at the door to prevent dust particles from entering and damaging the density board; Overweight items should be placed stably; Do not drag the furniture when moving it. It is better to lift it.

3. The dirt and oil stains on the surface of the density board should be cleaned with household detergent. Do not use a large amount of water to clean the density board. In case of stains on the surface of the density board, it is generally sufficient to dry it with a non-dripping damp mop. If it is stained with chocolate, grease, juice, drink, etc., just wipe it with warm water and neutral detergent. If it is contaminated by lipstick, crayon, ink, etc., it can be gently wiped with methanol or acetone.

4. In winter, attention should be paid to increasing the humidity on the surface of the density board, using wet mops to mop the floor, and properly increasing the surface humidity can effectively solve the cracks and cracks of the density board. In case of cracks at individual positions, please notify the sales unit in time to fill the parts. After filling, properly increase the surface humidity to facilitate the recovery of the density board.

5. The density board should try to avoid the direct exposure of strong sunlight and the long-term baking of high-temperature artificial light source, so as to prevent the surface of the density board from drying and aging in advance. In rainy season, close the windows to prevent the rain from wetting the density board. At the same time, pay attention to indoor ventilation, distribute indoor moisture, and maintain normal indoor temperature is also conducive to the extension of the life of the density board.